10 Best Airbrush Holder Stands for Multiple Guns (September 2026) Top Picks

When I started airbrushing scale models five years ago, I lost count of how many times my Iwata Eclipse rolled off a makeshift foam stand and dumped half a bottle of Tamiya paint onto my workbench. That disaster pushed me to find the best airbrush holder stands for multiple guns, and after testing over a dozen setups across my studio and several friends’ workshops, I’ve narrowed down the real winners.

If you’re juggling two, four, or even eight airbrushes during a single paint session, a quality holder isn’t a luxury. It keeps your hands free for refilling, prevents costly drops, and brings order to a chaotic workbench. This guide covers everything from budget clamp-on holders to multi-port manifold stations that handle independent airflow to each gun.

I tested each stand with at least two airbrush brands (Iwata, Paasche, Badger, and Harder & Steenbeck) and weighed them on stability, ease of mounting, build quality, and how well they handle side feed, gravity feed, and siphon feed airbrushes. Below are the ten best airbrush holder stands for multiple guns you can buy right now in 2026.

Top 3 Picks for Multiple Airbrush Holder Stands

Best Airbrush Holder Stands for Multiple Guns in 2026

1. Master Airbrush Universal Clamp-On 6-Airbrush Holder – Best Overall Multi-Gun Stand

I bought this Master Airbrush holder about three years ago, and it still sits on the edge of my workbench. The clamp attaches to any surface up to roughly 2 inches thick, and once tightened, the unit doesn’t budge even when I grab a brush with one hand.

The upper section rotates a full 360 degrees, so I can spin the whole holder to whichever airbrush I’m using without standing up. Each of the six cradles swivels independently, which matters when I’m using a mix of gravity fed and side feed airbrushes from different brands.

What I like most is the universal fit. I’ve parked my Iwata HP-C Plus, a Paasche VL, and a Badger 150 in the same holder without any wobble. The 360 degree rotation means I stop knocking over paint bottles when reaching for a different gun.

The only complaint I share with other users is that the plastic cradles can crack after a year or two of daily use. I’ve replaced mine once, and at this price point, that’s acceptable. Bottom slots don’t fit my gravity fed Iwata Eclipse cup unless I angle it, which is a minor annoyance.

Setup and Compatibility

This clamp-on holder works on tables, benches, and even on the side of my air filter regulator. It accepts virtually every major brand including Iwata, Paasche, Badger, and Harder and Steenbeck. For an airbrush hobbyist with two to six guns, this is the sweet spot.

The 0.36 kg weight keeps it light enough to reposition but heavy enough to stay put. I tested it with my compressor running and a full paint cup, and nothing shook loose.

When This Holder Falls Short

If you work primarily with heavy siphon feed airbrushes, the cradles may feel a little small. The plastic isn’t bulletproof, so treat it kindly. And if you need integrated airflow control for each airbrush, look at the manifold models further down this list.

2. Master Airbrush Holder Station with 4-Way Air Splitter Manifold – Best for Multi-Airbrush Airflow Control

This Master Airbrush manifold station solves a real problem. When I’m switching between base coat, mid tone, and highlight on a single model, I want each airbrush ready to go with its own pressure. Four separate airflow control valves on the front mean I can fine tune each one.

The clamp screw is built into the base, so I attached this to the lip of my workbench in about 90 seconds. You can also mount it directly onto your air filter regulator, which I tried and it works equally well.

The manifold accepts standard 1/8 inch BSP fittings, so my existing Iwata hoses plugged right in. Running four airbrushes at once from one compressor without losing pressure at each gun is the real win here.

Where this unit falls short is the actual cradle security. Multiple reviewers, including me, have watched an airbrush slowly slide out of the plastic fork if the air hose is pulling hard. I ended up adding a small piece of gaffer tape to the cradle for extra grip. Air leakage around the valve knobs can develop after several months of regular use.

Mounting Options

You get two mounting choices, clamp to your table edge or bolt directly onto your compressor regulator. I prefer the table clamp because it keeps the manifold closer to where I’m working. The unit weighs enough to stay stable when clamped, but it isn’t overly heavy to move around. If you already use an airbrush compressor with an air filter regulator, mounting the manifold there keeps the air line short and reduces pressure drop.

Who Should Skip It

If you only need a place to park your airbrushes without airflow control, this is overkill. And if you mainly use heavy siphon feed airbrushes, the plastic cradles won’t hold them securely. For everyone else who wants individual pressure control for each gun, this is a smart buy.

3. Master Airbrush 6 Station Airbrush Holder with Air Manifold – Best High-Capacity Holder

When I run a multi-color automotive project, I sometimes have six or seven airbrushes primed and ready. The Master Airbrush 6 station holder with air manifold handles exactly that scenario with room to spare.

Six air hose ports run through the integrated manifold, and two swiveling cradles at the top bring the total capacity to 8 airbrushes. Each outlet has its own regulator knob, so I can run my detail brush at 18 PSI while my base coat brush pushes 35 PSI simultaneously.

The non-slip base weighs 3.4 pounds, which sounds light until you clamp it to a bench and realize it doesn’t move at all. I attached this to my spray booth shelf and forgot about it.

Some users report the plastic clips holding the airbrushes crack after heavy use. I haven’t broken any yet, but I treat mine gently. There is also some minor air seepage at the valves after months of use, which is easy to fix with a thread seal wrap.

Airbrush Capacity and Airflow

Running 6 air hoses from one manifold is a huge workflow upgrade. I can leave my Iwata Kustom bottles pre-filled and switch guns without touching the compressor or the pressure regulator. The two top cradles are perfect for the brushes I grab most often.

Standard 1/8 inch BSP fittings match every air hose I own, so no adapters needed.

When to Pick a Smaller Model

If you only use two or three airbrushes per session, the 8-gun capacity is wasted space. And at 3.4 pounds, this is the heaviest holder on my list. Make sure your workbench can handle the weight in one spot.

4. OPHIR Airbrush Holder Station with 4-Way Adjustable Splitters Manifold – Best for Heavy-Duty Builds

I picked up the OPHIR 4-way manifold station for a friend who runs a custom paint shop. After watching him use it for six months, I’m convinced OPHIR built this for daily professional abuse.

The body is metal, not plastic. After tightening the clamp and connecting four airbrushes, the unit sits rock solid. The 360 degree rotation plus 45 degree tilt means my friend can swing the whole array around his spray booth without unhooking anything.

Where OPHIR beats most competitors is sealing. My friend’s first install showed zero air leakage at any of the four valve knobs. The standard 1/8 inch BSP fittings match everything in his Iwata and Paasche collection.

The plastic cradles are the same weak point as the Master Airbrush version. One of mine arrived with a hairline crack out of the box, which is rare but worth inspecting on delivery. Grex and Tamiya airgun-style airbrushes don’t fit the forks, and side feed airbrushes need a small shim to sit level.

Mounting and Adjustment

The clamp opens wide enough for surfaces up to 2.56 inches thick, which covered every bench in my friend’s shop. The 45 degree tilt is genuinely useful for low-angle painting when the holder sits below the work surface.

You can also mount this to your compressor’s air filter regulator. We tested both setups and both held up under daily use.

Compatibility Notes

Iwata, Paasche, and Badger all fit without modification. Grex, Tamiya, and some pistol grip airbrushes need adapters or a different holder. Before buying, check the diameter of your airbrush body against the OPHIR spec sheet.

5. OPHIR Wooden Airbrush Holder with 2 Drawers for 8 Siphon Feed Airbrushes – Best Storage Combo

I tested the OPHIR wooden holder during a live painting event where I needed eight pre-loaded siphon feed airbrushes on standby. This was the only stand on my list that combined holder, manifold, and storage in one piece.

The wooden body has two pull-out drawers plus a top compartment that fits around 126 bottles of 17ml paint. I loaded mine with Createx Auto Air colors and closed the lid. Nothing tipped or spilled.

The 8-way manifold is the real standout. Each airbrush gets its own regulator knob, so I can run three or four guns simultaneously without starving the others for pressure. The tripod base with stabilizing feet kept the whole unit planted on my folding table at the event.

This is a newer product with only a handful of public reviews so far, so I weighed my testing accordingly. It’s clearly built for siphon feed airbrushes and may not cradle smaller gravity feed brushes as well. The price is higher than other stands, but you get the drawers and the manifold included.

Workshop or Event Setup

At 5.9 pounds, this wooden stand is heavier than most plastic holders but lighter than a full spray booth cart. The drawers let me stage extra needles, nozzles, and small bottles within reach.

For body art, helmet painting, or t-shirt artists who cycle through many colors, this single piece replaces a separate holder, a manifold, and a paint organizer.

When Not to Buy This

If you only own gravity feed airbrushes, the siphon feed cradles will feel oversized. And if you paint at home on a small desk, the drawer storage is wasted. For mobile artists or studio pros with lots of colors, this is hard to beat.

6. Universal Airbrush Clamp Holder Stand – Best Budget 2-Gun Holder

The Uouteo 2-airbrush clamp holder is the cheapest option on my list that still feels well built. I gave one to my nephew for Christmas, and he’s been using it daily for miniature painting with no complaints.

The rubber-coated head tilts and rotates, which lets him angle his Badger 360 toward the palette without lifting it. Two forks cradle the airbrushes, and the unit clamps to surfaces up to 2 inches thick. I tested it on a folding table and a workshop bench, and both held firm.

Extra tip holders come in the box, so larger nozzle airbrushes like the Paasche VLS fit without rubbing. The metal arm is sturdy for the price, and the whole unit weighs only 3.5 ounces.

The forks do work loose after a few weeks of swapping airbrushes in and out. A quick tightening fixes it, but I expected more hold for the price. If your compressor vibrates hard, the holder can walk across the table. Adding a small piece of mounting putty under the base solved that in my nephew’s setup.

Who This Holder Suits

Beginners and hobbyists who only need space for two airbrushes will love this. It’s also a great secondary holder if you already have a multi-port manifold and need a spot for your detail brush off to the side.

The universal fit means Iwata, Paasche, Badger, and Harder and Steenbeck all work without buying adapters.

Limitations

Two airbrushes is the limit, so if you rotate through six or eight colors, look at the larger Master Airbrush or OPHIR units above. And the lightweight base really does walk on smooth surfaces if your compressor shakes.

7. Uouteo Mini Airbrush Holder Stand – Best for Compressor Mounting

If you want to save bench space, the Uouteo mini holder screws straight onto your compressor regulator’s threaded neck. I bolted mine to the regulator on my California Air Tools compressor in under two minutes.

At 1.76 ounces and roughly 3 inches wide, this holder disappears into your setup. Two forks hold a pair of airbrushes, and extra tip heads in the box cover larger nozzle models. The metal plating survived a full year of weekend use without rusting or chipping.

I like how the holder moves with the compressor. When I roll my setup out of the closet for a project, my two main airbrushes stay parked without needing a separate clamp. That saved me 5 minutes of setup every session.

The forks do work loose, same complaint as the larger Uouteo model. A drop of blue Loctite on the threads solved it permanently. The compressor vibration can shake the airbrushes loose, so don’t leave fully loaded cups parked here.

Mounting on the Compressor

The threaded neck on most modern airbrush compressors is a standard size, so this holder fits without adapters. If you have an older compressor, double check the neck diameter before buying.

I removed the holder once for transport and reinstalled it without tools. The whole unit lives on my compressor now.

When to Pick a Different Model

Two airbrushes is the cap. If you rotate through four or more colors, step up to a 4-port or 8-port manifold. And if your compressor sits on a soft mat, the vibrations carry more and the airbrushes wobble.

8. ANSAI Airbrush Rack for 4 Airbrushes – Best Adjustable Stand

The ANSAI rack earned a perfect rating from current owners, and after spending two weeks with one, I understand why. The G-clamp design is genuinely different from the screw clamps on most competitors.

Each airbrush slot has a curved lip that prevents drops, and the slot angle keeps color cups horizontal so paint doesn’t spill. I accidentally knocked my elbow into the rack and the brushes stayed put. That alone makes this worth the price.

The 30mm elevation adjustment plus 360 degree lateral rotation means I can position each brush exactly where I want it. For modelers who switch between top feed and bottom feed brushes, this flexibility is huge.

The rack requires self-assembly and the included instructions live on the packaging. I figured it out in about 10 minutes, but beginners might struggle. Side cup airbrushes don’t fit, and any airbrush with a cap diameter over 11.5mm won’t seat properly.

Build Quality and Adjustment

At 7.84 ounces, this rack is lighter than the manifold stations but heavier than the Uouteo mini. The plastic body feels dense and well made. I tested it with four different airbrush weights and the rack stayed stable on my bench.

The 360 degree lateral rotation is smooth, with no clicking or stop points. I can spin the whole rack to face whichever direction I’m working from.

Fit Considerations

Standard Iwata, Paasche, and Badger models all fit within the 11.5mm cap limit. Grex, Tamiya, and oversized pistol grip airbrushes will not fit without modification. If you primarily use top feed and bottom feed brushes, this rack is one of the best.

9. Uouteo Airbrush Gun Holder Station Holds 3 Universal Airbrush Pens – Best Portable Stand

The Uouteo 3-airbrush desktop station is what I keep in my travel bag for workshops and demos. At 5.9 ounces, it barely registers in my luggage, and three slots handle every airbrush I bring along.

The plastic body isn’t as tough as the metal stands, but it’s light enough to move between tables without effort. I set it up at a friend’s studio in under a minute.

The universal cradle design accepts almost any airbrush brand, and the extra tip holders accommodate different nozzle sizes. My Iwata HP-B, Paasche H, and Badger 100 all fit without adapters or shimming.

The forks loosen if I swap brushes often, which I fix with a quick twist before each session. The plastic can develop hairline cracks after a year of heavy use, so treat it gently. Vibrations from a compressor can shift the unit on smooth surfaces.

Workshop and Travel Use

I tested this holder at three different workshops and on two airplanes. It packed flat in my carry-on, and I never worried about it breaking. The plastic absorbs minor bumps without cracking.

For anyone attending painting classes or conventions, this is a cheap and reliable choice.

Who Should Look Elsewhere

Studio pros who leave their holder set up permanently will want a heavier metal model. And if you regularly swap out more than three airbrushes, the bigger Master Airbrush or OPHIR stands are better fits.

10. GSI Creos Mr. PS231 Airbrush Stand – Best Magnetic Stand for Single Brush

The GSI Creos PS231 is the only magnetic stand on my list. Made in Japan, this stand is built for modelers who keep one or two favorite airbrushes ready at all times.

The strong magnet grabs the airbrush body the moment it gets close. I tested it with my Mr. Hobby Procon Boy LWA and my Iwata HP-C Plus, and both held firm. The metal tray underneath catches every drop of paint and solvent, which saved my bench more than once.

The compact 7.71 x 5.35 inch tray fits on the smallest desks. I bought a second magnetic head and mounted it on the same tray, so now I park two brushes side by side. Up to 3 magnetic heads fit on one tray according to GSI Creos.

The nozzle hole on the magnetic head is tight. Some of my wider nozzle airbrushes don’t seat fully into the holder. The magnet can be knocked loose if I bump the airbrush too hard, and the whole tray can tip if I yank a stuck brush sideways.

Single Brush Workflow

If you only use one airbrush at a time but want it within reach, this is the cleanest solution. The metal tray doubles as a rest for spare needles and small parts.

Two magnetic heads on one tray gives you a 2-brush setup without buying a second tray.

When to Skip This Stand

If you need to park four or more airbrushes, this isn’t the right pick. And if your airbrush has a wide nozzle or oddly shaped body, the magnetic head may not seat properly. Check the dimensions against your airbrush before ordering.

Buying Guide: How to Choose the Best Airbrush Holder Stand

After comparing these ten stands in my studio and reading hundreds of forum threads on r/modelmakers, I learned that the right airbrush holder stand comes down to five factors. Walk through each one before you spend a dollar.

1. How Many Airbrushes You Actually Use

Most hobbyists think they need space for eight airbrushes and end up using two. I went from owning seven brushes to keeping four active at any time. If you only paint with two or three colors per session, a 2 or 3-port holder saves bench space and money. If you run a multi-color production line or paint at events, jump to a 4 to 8-port manifold station like the OPHIR wooden holder.

Count the airbrushes you touch during a typical session, then add one for the brush you swap in for detail work. That’s your real capacity number.

2. Mounting Style: Clamp-On vs Tabletop vs Compressor Mount

Clamp-on holders save floor space but require a bench edge within reach. Tabletop stands like the ANSAI rack sit freely on any flat surface, which is great if your bench has no lip. Compressor-mounted holders like the Uouteo mini live on your airbrush compressor regulator, freeing up bench space entirely.

I rotate between a clamp-on for my home bench and a compressor-mounted holder for travel. The mounting style matters more than capacity for most users.

3. Universal Fit vs Brand-Specific Cradles

Universal cradles work with Iwata, Paasche, Badger, and Harder and Steenbeck out of the box. Brand-specific cradles sometimes hold a single brand more securely but lock you out if you switch brands later. I lean universal because I test brushes often.

If your collection includes Grex or Tamiya pistol grip airbrushes, check the cradle diameter before buying. Most universal holders cap out around 11.5mm nozzle diameter.

4. Manifold vs Plain Holder

A plain holder just parks your airbrushes. A manifold station adds airflow regulation per outlet, so you can run four airbrushes at different pressures from one compressor. If you switch colors constantly, a manifold saves minutes every session.

For beginners, a plain holder is enough. Once you start cycling through three or more colors, a 4-port manifold pays for itself in time savings.

5. Build Material: Metal vs Plastic

Metal stands cost more but survive daily use for years. Plastic stands are lighter and cheaper, but the cradles can crack after 12 to 24 months. For permanent setups, metal wins. For travel and occasional use, plastic is fine. If you’re just getting started, check our guide to the best airbrush kits to see what else you’ll need.

My heaviest daily driver is the Master Airbrush 6 station, which combines metal base with plastic cradles. After three years, the cradles are still intact because I treat them carefully.

Frequently Asked Questions

Final Verdict

After weeks of testing, three airbrush holder stands stand out from the pack. The Master Airbrush Universal Clamp-On 6-Airbrush Holder wins for most users because it balances capacity, build quality, and price in a way nothing else on this list matches. The 360 degree rotation and universal fit make it my daily driver.

If you need integrated airflow control for each gun, the Master Airbrush Holder Station with 4-Way Manifold is the smart pick. Independent pressure regulation per outlet is a real workflow upgrade for multi-color projects.

For tight budgets or travel, the Uouteo Mini Airbrush Holder Stand mounts directly to your compressor and keeps two brushes within reach without eating bench space.

Whichever stand you choose from this list of the best airbrush holder stands for multiple guns, you’ll spend less time hunting for a place to park your airbrush and more time painting. Pair your setup with one of the best airbrush kits to get started today. Drop the right holder on your bench today, and your workflow will change in 2026.