I pulled my Canon RF 50mm f/1.8 out of the box, ready to shoot, and immediately hit a familiar frustration. No hood. No shade. Nothing to block stray light from washing out my shots. Canon made the baffling choice to ship most non-L RF lenses without hoods, which sends thousands of photographers searching for the best lens hoods for Canon RF lenses. Our team has spent months testing OEM and third-party options across RF primes, zooms, and telephotos, and the fitment information is scattered across Reddit and Canon forums. This guide consolidates everything: compatibility, the right Canon hood part number for your lens, and our tested picks under $20 that actually click into place.
After fitting more than 30 hoods on RF mount bodies in our studio, I learned that the right hood boils down to three things: a secure bayonet click, proper filter thread clearance, and the right shape for your focal length. Skip any one of those, and you end up with vignetting on wide angles or a hood that rattles loose. Below, I break down 8 hoods that nail all three.
If you are still building your Canon RF kit, our best lenses for Canon cameras roundup and best Canon mirrorless cameras guide cover the glass and bodies to pair these hoods with.
Top 3 Picks for Canon RF Lens Hoods in September
JJC Lens Hood for Canon RF…
- Replaces Canon ES-65B
- 43mm filter thread
- Reversible bayonet
- Click-lock security
JJC Tulip Flower Lens Hood…
- Tulip shape for wide FOV
- 43mm filter thread
- Replaces ES-65B
- Reversible
Best Lens Hoods for Canon RF Lenses in 2026
| Product | Specs | Action |
|---|---|---|
| JJC ES-65B Lens Hood for Canon RF 50mm F1.8 STM |
|
Check Latest Price |
| JJC Tulip Flower Lens Hood for Canon RF 50mm |
|
Check Latest Price |
| K&F CONCEPT Lens Hood for Canon RF 50mm |
|
Check Latest Price |
 JJC Lens Hood for Canon RF 16mm F2.8 STM |
|
Check Latest Price |
 JJC ET-77 Lens Hood for Canon RF 85mm F2 |
|
Check Latest Price |
 K&F CONCEPT EW-73D Lens Hood for RF 24-105mm |
|
Check Latest Price |
 JJC ET-60 Lens Hood for Canon RF 75-300mm |
|
Check Latest Price |
 JJC Dual Lens Hood Kit for Canon R50 R100 |
|
Check Latest Price |
1. JJC ES-65B Lens Hood for Canon RF 50mm F1.8 STM – Editor’s Choice
Lens Hood for Canon RF 50mm F1.8 STM on EOS R6 R5 RP R Camera, Reversible Lens Shade Replace Canon ES-65B Lens Hood, Compatible with 43mm Filters and 43mm Lens Cap
Replaces Canon ES-65B
43mm filter thread
Reversible bayonet mount
Pros
- Perfect click-lock fit on RF 50mm
- Reversible for compact storage
- About 1/3 the price of Canon OEM
- Effective flare reduction in backlight
- Lightweight ABS construction
Cons
- No internal felt lining like Canon OEM
- Turns and clicks instead of button release
The JJC ES-65B replacement is the hood I keep mounted on my RF 50mm f/1.8 STM. The first thing you notice when you snap it on is the satisfying click. It locks into the same bayonet notches as Canon’s own ES-65B, with zero play or rattle, which is more than I can say for some other third-party hoods I tested that fit loosely.
Build quality is what sold me. The ABS plastic feels rigid without being brittle, and the matte interior finish reduces internal reflections. It is noticeably lighter than the Canon OEM hood at about 1.2 ounces, and when I reverse it for storage, the lens takes up almost no extra space in my bag.
Shooting into a low winter sun, I saw a real difference with the hood attached. Veiling flare dropped significantly on backlit portraits, and contrast in foliage scenes looked punchier. Without the hood, I was getting washed-out highlights and ghosting on bright edges. The 43mm filter thread is preserved, so my polarizer still threads on without removing the hood.
One thing to know: it lacks the internal felt lining that Canon OEM hoods have. In extreme side-light conditions, you may get a touch more internal reflection than the Canon hood would give you. For everyday shooting, I have not noticed it as an issue.
For whom its good
This hood is the right pick for RF 50mm f/1.8 STM owners who want a secure, OEM-quality fit without paying the Canon premium. It is also ideal for travel photographers who reverse-mount their hoods to save bag space, and for anyone shooting outdoor portraits in mixed lighting.
For whom its bad
Skip this if you own the RF 50mm but shoot almost exclusively with the hood reversed. The click-lock mechanism is a non-issue in storage mode, but if you need a true felt-lined interior for extreme backlight work, the Canon ES-65B itself may suit you better.
2. JJC Tulip Flower Lens Hood for Canon RF 50mm F1.8 STM – Best Petal Design
Tulip Flower Lens Hood for Canon RF 50mm f/1.8 STM on EOS R6 R5 RP R Camera, Reversible Lens Shade Replace Canon ES-65B Lens Hood, Compatible with 43mm Filters and 43mm Lens Cap
Tulip shape
Replaces Canon ES-65B
43mm filter thread
Pros
- Tulip shape blocks side-light flare
- Perfect fit on RF 50mm
- Reversible for storage
- Comparable quality to OEM
- Strong ABS material
Cons
- Slightly higher price than standard JJC
- Shipping delays reported internationally
- Tulip shape not for everyone
If you regularly shoot wide-open landscapes or street scenes with your RF 50mm, the tulip shape of this JJC hood is a smart upgrade. The four-petal geometry blocks stray light coming from lower angles (think sun behind a building) without intruding into the rectangular image frame. On a standard round hood, you can sometimes see the hood edge in the corners at f/1.8. Not here.
Mounting it on my RF 50mm felt identical to the standard JJC model. The bayonet clicks into the same notches with a clean lock, and the matte interior surface is properly non-reflective. At 1.16 ounces, it is barely heavier than the rectangular version despite the more complex shape.
The flare performance impressed me most. Shooting into late afternoon sun on a coastal scene, I got rich color saturation and no ghosting where I would normally see purple fringing along the edges. For backlit portraits, the tulip shape also throws a softer shadow on the subject, which is a nice bonus.
It still accepts 43mm filters and lens caps, and reverses for storage. The trade-off is a small price bump over the rectangular JJC, and the look is more polarizing: some photographers love the tulip profile, others find it visually busy.
For whom its good
Pick this tulip hood if you shoot wide-open at f/1.8 and want maximum flare control without vignetting. Landscape, street, and event photographers on the RF 50mm will get the most out of the four-petal design.
For whom its bad
If you prefer a clean rectangular profile, or shoot mostly stopped down to f/4 and beyond, the tulip shape adds no real benefit. Standard round or rectangular hoods will be cheaper and visually simpler.
3. K&F CONCEPT Lens Hood for Canon RF 50mm F1.8 STM – Best Value
K&F CONCEPT Lens Hood Compatible with Canon RF 50mm F1.8 STM Lens
Replaces Canon ES-65B
43mm filter thread
Snap-on bayonet
Pros
- Excellent fit on RF 50mm and RF 100-400
- Strong value vs OEM
- Secure lock with minimal play
- Easy install and reverse
- Includes lock button
Cons
- Rotation slightly less smooth than Canon
- Lacks OEM felt lining
- Longer hood profile
K&F CONCEPT has built a reputation for solid budget glass accessories, and this ES-65B replacement carries on that tradition. It is the lowest-priced option in this roundup, and the fit on my RF 50mm f/1.8 STM was nearly identical to the OEM Canon hood. The bayonet snaps in cleanly, with minimal wiggle.
The standout feature for me was cross-compatibility. I tested it on the RF 100-400mm f/5.6-8 IS USM as well, and it locked on perfectly. That makes this hood a smart buy if you own both lenses and want to share hoods across your kit, or if you upgrade lenses in the future.
On a bright outdoor test, flare control was on par with the more expensive JJC tulip and the Canon OEM. The matte interior finish kept internal reflections in check, and the 43mm filter thread is preserved so my CPL and ND filters still mount. The hood is also reversible for compact storage.
One minor quibble: the lock button is functional but feels a touch less refined than the Canon OEM release. Rotation is slightly stiffer. Still, at the price point, this is hard to fault.
For whom its good
Budget-focused shooters who want a single hood to share between the RF 50mm and RF 100-400 will love the cross-compatibility. Beginners building a Canon RF kit on a tight budget also get OEM-grade fit and flare control for a fraction of the cost.
For whom its bad
If you are particular about the smoothness of the lock mechanism, or you prefer the OEM feel of a Canon hood with internal felt lining, step up to the JJC or Canon ES-65B. For most users, this is a non-issue.
4. JJC Lens Hood for Canon RF 16mm F2.8 STM – Best for Wide-Angle
Lens Hood for Canon RF 16mm F2.8 STM Lens on EOS R5 II R6 II R8 R1 R3 RP R Camera, Reversible Lens Shade Replace Canon EW-65C Lens Hood, Compatible with 43mm Filters and 43mm Lens Cap
Replaces Canon EW-65C
43mm filter thread
Locking notch
Pros
- Perfect fit on RF 16mm
- About 1/3 the price of Canon OEM
- Reversible for storage
- Durable ABS build
- Locking notch security
Cons
- No internal felt lining
- Focus ring can be harder to access
- Lens cap may need extra force
The RF 16mm f/2.8 STM is one of the trickiest RF lenses to find a hood for. Canon makes the EW-65C, but it is priced at a premium and is not always easy to find in stock. This JJC replacement is the workaround: a perfect-fit bayonet hood at a third of the price, with the same locking notch as the OEM.
Mounting it on my EOS R8 and walking around the city, the fit was excellent. The hood clicks into place and stays put. The shorter profile is designed specifically for wide-angle coverage, so I did not see any vignetting in the corners at any aperture.
Flare control on a 16mm is more about preventing veiling glare than ghosting, and this hood does that job well. Shooting toward a setting sun, the contrast stayed acceptable even at f/2.8, where many hoods would have failed. The matte interior is doing its job.
Reversing it for storage works fine, though the 16mm lens is already small enough that the reversed hood adds minimal bulk. The 43mm filter thread remains accessible, so my wide-angle polarizer still threads on without issues.
For whom its good
RF 16mm f/2.8 STM owners who shoot street, travel, or environmental portraits will benefit most. The locking notch gives you confidence the hood will not fall off in active shooting, and the lower price means you do not have to baby it.
For whom its bad
If you regularly rotate between the focus/control ring and the hood position, you may find the ring harder to access with the hood on. It is a minor ergonomic note, not a deal-breaker for most shooters.
5. JJC ET-77 Lens Hood for Canon RF 85mm F2 Macro IS STM – Best for Portraits
Lens Hood for Canon RF 85mm F2 Macro is STM Lens on EOS R6 R6 Mark II R5 RP R Camera, RF 85mm Lens Hood Reversible Lens Hood Replace Canon ET-77 Hood, Compatible with 67mm Filters and 67mm Lens Cap
Replaces Canon ET-77
67mm filter thread
Bayonet click
Pros
- Perfect fit on RF 85mm F2
- Comparable to OEM at 1/4 price
- Reversible for storage
- Strong flare reduction
- 67mm filter thread preserved
Cons
- No Canon logo (cosmetic)
- Lacks OEM felt lining
- Some prefer stiffer OEM feel
Canon’s decision not to include a hood with the RF 85mm f/2 Macro IS STM is one of the most complained-about issues on r/canon. The lens is a portrait favorite, and shooting without a hood at f/2 in backlight is a recipe for ghosting. This JJC ET-77 replacement is the fix: a perfect-fit hood at a fraction of the OEM price.
I tested it on my RF 85mm paired with the EOS R6 Mark II. The bayonet click is identical to the Canon ET-77, the build is solid ABS plastic, and the 67mm filter thread is preserved for my circular polarizer. With 818 reviews and a 4.6-star average, this is one of the most trusted third-party hoods on the market.
On a backlit golden-hour portrait session, the hood eliminated the greenish ghosting I had been seeing along the model’s hair edges. Contrast on skin tones improved noticeably. Without the hood, I was getting washed-out highlights and reduced micro-contrast in the eyes. The matte interior finish is doing real work here.
Reversing it for storage works smoothly. At 2.15 ounces, it adds minimal weight. The only cosmetic quibble is the lack of the Canon logo, but functionally this hood is indistinguishable from the OEM.
For whom its good
RF 85mm f/2 Macro IS STM owners who shoot portraits, headshots, and backlit subjects will see the biggest improvement. The 67mm thread is also wide enough for serious filtration, so landscape shooters using this lens for close-focus work will benefit too.
For whom its bad
If you shoot mostly in studio conditions with controlled lighting, a lens hood is less critical. Studio shooters may not see enough improvement to justify the purchase.
6. K&F CONCEPT EW-73D Lens Hood for Canon RF 24-105mm F4-7.1 IS STM – Best for Kit Zoom
K&F CONCEPT Lens Hood Shade Replace of EW-73D Hood Compatible with Canon
Replaces Canon EW-73D
67mm filter thread
Snap-on bayonet
Pros
- Exact fit on RF 24-105mm
- Strong value vs OEM
- Effective stray light blocking
- Reversible for storage
- Protects lens from dust and droplets
Cons
- Lacks OEM-style lock button
- Snug fit on some lenses
- Reversibility not obvious at first
The RF 24-105mm f/4-7.1 IS STM is the kit lens for many EOS R-series owners, and Canon ships it without a hood. For travel and everyday shooting, that is a problem in bright light. This K&F CONCEPT EW-73D replacement is the right fit. It snaps on with the same bayonet system as Canon’s own hood and is built to match.
Mounted on my RF 24-105mm, the fit was exact. The 67mm filter thread is preserved, which matters because this lens takes wide filters for landscape work. Reversing it for storage was a bit less intuitive than other hoods I tested. You have to align the bayonet tabs in reverse mode, but once I figured it out, the process was quick.
On a daytime hike shooting into the sun at the wide end, I noticed a clear reduction in veiling flare. Colors looked richer and contrast held up where I would normally see washout. At the telephoto end, the longer hood profile really helps cut side-light flare from off-frame highlights.
It also works on the EF-S 18-135mm f/3.5-5.6 IS USM, which is a bonus for anyone using adapted lenses. Just note that it is NOT compatible with the EF-S 18-135mm f/3.5-5.6 IS STM. Check your lens version before ordering.
For whom its good
RF 24-105mm kit lens owners who shoot travel, landscape, or general outdoor photography will get the most out of this hood. The cross-compatibility with EF-S 18-135mm f/3.5-5.6 IS USM also makes it a smart pick for users with mixed Canon systems.
For whom its bad
If you own the EF-S 18-135mm f/3.5-5.6 IS STM (note the STM, not USM), this hood will not fit. Verify your lens model before purchasing. The snug fit on some lenses also requires patience during initial install.
7. JJC ET-60 Lens Hood for Canon RF 75-300mm – Best for Telephoto
JJC ET-60 Lens Hood for Canon RF 75-300mm, EF 75-300mm & EF-S 55-250mm Lens
Tulip design
58mm filter thread
Replaces Canon ET-60
Pros
- Perfect fit on compatible Canon telephotos
- Twist-on bayonet is secure
- Reversible for storage
- About 1/3 the price of OEM
- Non-glare matte interior
Cons
- NOT for EF 75-300 IS USM or EF-S 55-250 IS STM
- Some fit issues on certain lenses
- Not for EOS 80D kit lens
With 1,418 reviews and a top-3 sales rank in Camera Lens Hoods, the JJC ET-60 is the most proven telephoto hood in this roundup. It is designed to replace the Canon ET-60 for the RF 75-300mm f/4-5.6, plus several EF and EF-S 75-300mm variants. If you have a compatible Canon telephoto, this is the hood to buy.
Testing it on my RF 75-300mm paired with the EOS R7, the fit was excellent. The twist-on bayonet locks in both shooting and reversed positions, and the tulip shape is tall enough to block side-light at the long end of the zoom without intruding on the image frame. The matte interior is properly non-reflective.
On a wildlife shoot at 300mm, the hood made a real difference. Shooting toward late afternoon light, I got much cleaner background separation and no ghosting along the edges of birds in flight. Without the hood, the same conditions produced noticeable flare and reduced micro-contrast on feather details.
The 58mm filter thread is preserved, which is rare for a telephoto hood at this price point. It is also reversible for storage, and the build quality is solid ABS. The biggest caveat is compatibility. It does NOT fit the EF 75-300mm f/4-5.6 IS USM or the EF-S 55-250mm f/4.5-5.6 IS STM. Check your exact lens model before ordering.
For whom its good
RF 75-300mm owners shooting wildlife, sports, or travel telephoto work will appreciate the flare control and the cross-compatibility with older EF/EF-S 75-300mm lenses. The price is a fraction of the Canon OEM.
For whom its bad
If you own the EF 75-300mm f/4-5.6 IS USM or the EF-S 55-250mm IS STM, this hood will not fit. Look for a model specifically designed for those versions, or consider an alternative.
8. JJC Dual Lens Hood Kit for Canon R50 R100 – Best for R50/R100 Kit
(1+1) Lens Hood for Canon R50 R100 Dual Lens Kit (RF-S 18-45mm F4.5-6.3 is STM and RF-S 55-210mm F5-7.1 is STM) Replaces ET-60B and EW-53 Lens Hood
Replaces ET-60B and EW-53
Two-pack
2 hoods included
Pros
- Two hoods covering both kit lenses
- Easy bayonet install with alignment marks
- Good glare reduction and clarity
- Shockproof protection
- Much cheaper than Canon versions
Cons
- Reversed mounting is finicky
- One user reported slight sharpness loss
- Limited to R50/R100 kit lenses
If you bought the Canon R50 or R100 with the dual lens kit, you have the RF-S 18-45mm and RF-S 55-210mm. Canon ships neither with a hood. This JJC dual-pack fixes that problem in one purchase: one hood for each lens, both at a price lower than buying two OEM hoods separately.
I tested both hoods on my R100. The bayonet mount is easy: align the marks, twist, and click. The ET-60B replacement fits the 55-210mm telephoto, and the EW-53 replacement fits the 18-45mm wide zoom. Both lock securely and reverse for storage, though reversing the smaller EW-53 took a few tries to get the alignment right.
For a beginner kit, the flare control was a noticeable upgrade. Shooting outdoors with the sun at an angle, I got sharper edges and better contrast on the wide end, where the 18-45mm is most prone to veiling flare. The matte interior finish on both hoods keeps internal reflections in check.
The two-pack is genuinely useful. Most entry-level shooters do not realize they need a hood for both lenses, and having them together removes the decision fatigue. Build quality is solid ABS plastic, identical to the single-packs JJC sells separately.
For whom its good
Canon R50 and R100 owners with the dual lens kit will get the most value from this two-pack. Beginners who want to set-and-forget their kit without researching individual hoods will appreciate the bundled convenience.
For whom its bad
If you own only one of the two kit lenses, or you shoot with full-frame RF glass, this kit is overkill. The hoods are specific to RF-S 18-45mm and RF-S 55-210mm only.
How to Choose the Best Lens Hood for Your Canon RF Lens
Choosing the right lens hood for your Canon RF lens comes down to compatibility, focal length, and whether you want OEM or third-party. The first step is identifying the exact Canon part number for your lens. Canon uses three prefixes: EW- for wide-angle and standard zooms, ET- for telephotos, and ES- for short primes. Once you know your lens’s part number (printed on the original box or in Canon’s lens database), you can find a matching hood or a third-party equivalent.
Third-party hoods from JJC, K&F CONCEPT, and Vello typically replicate the OEM part number directly. A JJC ES-65B is a direct replacement for the Canon ES-65B. The build quality on top sellers is excellent, and the price is usually one-third to one-quarter of OEM. For most users, a quality third-party hood is the smart buy.
You will also notice that the prefix tells you about the focal length. ET- hoods are typically round and designed for longer focal lengths where vignetting is not a concern. EW- hoods are often petal-shaped to maximize side-light blocking without intruding on the wide-angle image circle. ES- hoods are short and compact, designed for pancake-style primes like the RF 50mm f/1.8 STM.
Petal vs round hoods is a real choice. For wide-angle lenses under 35mm, a petal hood is almost always better because it blocks more side-light without vignetting the corners. For telephotos above 70mm, a round hood is fine because vignetting is rarely an issue. For standard zooms in the 24-70mm range, both work, and the choice comes down to aesthetic preference.
Bayonet vs screw mount is another consideration. Most modern Canon RF lenses use a bayonet mount, which clicks into place and is easy to reverse for storage. Some older or third-party designs use a screw mount, which is less common and can be slower to attach. Stick with bayonet mounts unless you have a specific reason to go screw.
For shooters considering the larger telephoto zooms, our best Canon telephoto lenses guide covers the lenses these hoods are designed to fit. If you are starting from scratch on a Canon body, the best Canon mirrorless cameras roundup is a good companion read.
Canon RF Lens Hood Compatibility Chart
Here is a quick compatibility reference for the most common Canon RF lenses and their matching hoods. For lenses not on this list, check Canon’s official lens database or the third-party hood product page before ordering.
Canon RF 50mm f/1.8 STM: ES-65B (replacement: JJC ES-65B, K&F CONCEPT ES-65B)
Canon RF 85mm f/2 Macro IS STM: ET-77 (replacement: JJC ET-77)
Canon RF 16mm f/2.8 STM: EW-65C (replacement: JJC EW-65C)
Canon RF 24-105mm f/4-7.1 IS STM: EW-73D (replacement: K&F CONCEPT EW-73D)
Canon RF 75-300mm f/4-5.6: ET-60 (replacement: JJC ET-60)
Canon RF-S 18-45mm f/4.5-6.3 IS STM: EW-53 (replacement: JJC EW-53 in dual kit)
Canon RF-S 55-210mm f/5-7.1 IS STM: ET-60B (replacement: JJC ET-60B in dual kit)
Canon RF 100-400mm f/5.6-8 IS USM: ET-74B (replacement: K&F CONCEPT ES-65B also fits, see product notes)
Why Some Canon RF Lenses Don’t Include Hoods
Canon’s decision to omit hoods from most non-L RF lenses is one of the most-discussed gripes in the Canon community. The official reasoning is cost savings and packaging size, but most photographers see it as a corner-cut. Whatever the reason, the practical impact is the same: you need to buy a hood separately, and Canon OEM hoods are often priced 3-4x what a third-party equivalent costs.
The good news is that third-party hoods from JJC, K&F CONCEPT, and Vello are genuinely good. They fit securely, they flare-protect as well as OEM, and they cost a fraction of the price. Our top pick in this roundup, the JJC ES-65B for the RF 50mm, has 669 reviews at 4.7 stars and is widely recommended on r/canon as a no-brainer purchase.
Frequently Asked Questions
What lens hood fits the Canon RF 50mm f/1.8 STM?
The Canon ES-65B is the official OEM hood for the RF 50mm f/1.8 STM. Quality third-party replacements include the JJC ES-65B and Ku0026amp;F CONCEPT ES-65B, both of which fit the same bayonet mount and preserve the 43mm filter thread. The JJC tulip flower version offers extra side-light blocking for wide-open shooting.
Are JJC lens hoods as good as Canon OEM?
Yes. JJC hoods use the same bayonet mount geometry as Canon OEM hoods, with secure click-lock fit and matte interior finishes. Top sellers like the JJC ES-65B and JJC ET-77 have hundreds of reviews at 4.6+ stars. The main difference is the lack of internal felt lining, which is a minor concern for most shooting conditions.
Do all Canon RF lenses use the same lens hood?
No. Each Canon RF lens has a specific hood part number, identified by an EW-, ET-, or ES- prefix. Wide-angle lenses typically use EW- hoods, telephotos use ET- hoods, and short primes use ES- hoods. Petal-shaped hoods are common for wide-angles to prevent vignetting. Always check the exact part number for your lens before buying a hood.
Which way does a Canon lens hood go on?
Canon lens hoods attach via a bayonet mount. Align the small dots or marks on the hood and lens barrel, push the hood onto the lens, and twist clockwise (when looking at the front of the lens) until it clicks. To remove, twist counter-clockwise. Most hoods also reverse-mount for storage: align the marks again, push on, and twist in the opposite direction.
Do professional photographers actually use lens hoods?
Yes. Almost every professional photographer uses a lens hood on every lens. Hoods reduce flare and ghosting in backlit conditions, improve contrast, and protect the front element from accidental impacts. The cost is minimal and the image quality benefit is significant, especially outdoors.
Final Verdict: Which Canon RF Lens Hood Should You Buy in 2026?
After testing 8 of the top-selling lens hoods for Canon RF lenses, our team has a clear recommendation. The JJC ES-65B is the best overall pick for RF 50mm f/1.8 STM owners, with a perfect-fit bayonet, 669 reviews at 4.7 stars, and a price that is roughly one-third of the Canon OEM. If you want the petal design for wide-open shooting, the JJC Tulip Flower is the upgrade.
For RF 85mm f/2 Macro IS STM owners, the JJC ET-77 is the must-have accessory, especially since Canon does not include a hood with the lens. Budget shoppers should grab the K&F CONCEPT ES-65B for cross-compatibility with the RF 100-400. Wide-angle shooters on the RF 16mm will find the JJC EW-65C to be the only real option that fits securely.
Whichever hood you choose, the upgrade in image quality and lens protection is well worth the modest cost. For more Canon gear recommendations, our best lenses for Canon cameras roundup is a great place to start. Pick the hood that matches your lens, click it into place, and enjoy cleaner shots from your first frame.
